Brad Nailer Vs. Framing Nailer

brad_vs_framingUsing compressed air nailers such as brad nailers and framing nailers is a great way to save you a ton of time when performing many of the different construction activities that you might have to perform when on the job. Not only will they save you time, but they will also help prevent you from over straining yourself by having to hammer everything by hand.

Brad nailers and framing nailers are very similar in their design and the concept of how they work. Both utilize air pressure which forces the nail out of the nailer at very high speeds to that the nail can penetrate the wood well enough to sink in flush with the surface. There are differences, however, between the two that essentially make them completely different with regard to what they are used for.

Perhaps the most noticeable difference between brad nailers and framing nailers is the type of nails that are used for each. Brad nailers use much smaller nails because brad nailers are typically used in the finish work, which in most cases requires a high level of inconspicuousness because the nails must be hidden from view. A lot of times brad nailers are used for things like wall trim, waynes coating, and other very detailed types of wood work.

Framing nailers are used more for the heavy duty nailing tasks such as building stud walls for the frame of a house. These types of nailers use heavier gauge nails because they have a bigger job to do than brad nailers. Also, the nails used in framing nailers can be quite large which requires that more force be used. For this reason framing nailers often times require much more air pressure.

A brad nailer would not be appropriate for framing stud walls because it simply does not have enough power and does not use the right size nails to properly fasten stud boards and other larger pieces of wood together.

You wouldn’t want use a framing nailer to complete any finish work that has to be done, such as fastening trim boards, because the framing nailer uses nails that are much too large. Another reason that you wouldn’t want to use a framing nailer in this situation is because the high amount of pressure could damage the wood that is used for finish work, which would not look good when completed.

So you can see that in the battle of brad nailer vs. framing nailer, each has it’s own distinct purposes and are actually quite different from each other.